The hanging air sprayer is mainly a kind of orchard sprayer used with the tractor. The machine is matched to the rear output shaft of the tractor, and the medicine pump, gearbox and fan are driven by the transmission shaft to realize the process of spraying, atomization and air delivery. First of all, it is necessary to fix the suspension arm of the tractor to the fixing points on both sides of the lower side of the suspended sprayer, and then fix it with bolts, and then connect the lifting rod of the tractor to the link installation position on the sprayer, which is the so-called transmission. The three-point suspension (similar to the use of the rotary tiller in the tractor-mounted agricultural equipment, if necessary, you can open our company video to watch), after connecting the drive shaft, it can be used normally. In the process of using the orchard air-delivered sprayer At the same time, it is necessary to adjust the height of the tractor suspension at any time according to the different tree shapes and terrains of the fruit trees, especially in some orchards with lower fruit trees, which are similar to the Greenhouse King tractor. Front end plus weights. All the above work is ready before you can go to work in the ground.

The above is how to adjust and hang the orchard sprayer. After the above preparations are completed, the air delivery system of the sprayer needs to be adjusted according to different orchards. There is an air guide cone in the middle of the fan, and there is a special air duct to the outside. The main purpose is to adjust the direction of the airflow, and at the same time, it is also necessary to adjust and convert different nozzles according to the spraying of different liquids.