1) Of course, you should read the manual first. If you don’t read the manual, you can watch the video tutorials issued by our company. This is really very important.

2) After reading the manual, first check whether the fixing bolts of the main components such as the drive shaft and tires of the machine are loose. If they are loose, fasten them in time. Next, check whether the nozzles and the links of the medicine tube are loose. If you check everything There is no problem. First, add clean water, test the machine, and check whether there is any place that needs to be adjusted, especially whether each nozzle can operate normally and whether it needs to be adjusted.

3) After the test machine with clean water is completed, the spraying operation can be carried out by adding medicine normally. Remember that strong acid or strong alkali liquid is not allowed, because strong acid and strong alkali liquid will cause a certain degree of corrosion to the metal parts of the machine. In addition, after each use of the machine, it is necessary to add water for spraying operation for at least two minutes, so that the liquid medicine in the medicine box and medicine tube medicine pump can be fully eliminated, and the next use can be used directly.

4) Another point that needs special attention is the gearbox. Because the gearbox of the fan rotates at a high speed, it is necessary to use high-quality gear oil and some yellow grease, otherwise it will easily cause damage to the inside of the gear and affect the service life of the machine. failure rate.

The above is for reference only. For detailed steps, please refer to the specific manual of the specific model, and follow the steps in the manual.